SDS Sequence mode: Stop after end frame is reached
October 6, 2022
Many SIGLENT SDS series oscilloscopes feature Sequence mode, which can be used to capture multiple trigger events that can be replayed like frames in a movie. In this video, we show how to use SINGLE trigger mode to stop acquisition after the user-defined sequences have been captured.
VNC Viewer for easy LAN control of multiple instruments
October 6, 2022
In this video, I connect an SDS6000A series oscilloscope and SDG7000A series arbitrary waveform generator to a computer using a LAN and highlight some of the features of a commercially available VNC(r) software tool. If you are remotely monitoring instrumentation, these types of tools can be very helpful in displaying information.
Power Supply Design: Load Step Response with a SIGLENT DC Electronic Load
April 3, 2020
In this video, I compare the response from two power supplies using a stepped load to show the differences between a well-tuned supply and one that exhibits excessive ringing. Also, add in some basic instrument requirements to help get you started making your own step load tests. Here, I use a SIGLENT SDL1X-E DC Electronic … Continued
Chris Grossman investigates 50 ohm feed through terminators using a SIGLENT SDS1X-E scope and SDG2X generator
July 16, 2019
In this video, Chris shows how terminations affect signals and compares various 50 ohm terminations using a SIGLENT scope and function generator:
Dave Jones interviews SIGLENT CEO Eric Qin
January 22, 2018
Siglent Founder and CEO Eric Qin visited the EEVblog Lab and very kindly agreed to sit down for a quick impromptu chat. NOTE: Proper English subtitles are available. http://siglent.com/ens/ Forum: http://www.eevblog.com/forum/blog/eev… EEVblog Main Web Site: http://www.eevblog.com The 2nd EEVblog Channel: http://www.youtube.com/EEVblog2
How to use the Interval Trigger with a SIGLENT Oscilloscope
January 22, 2018
How to use the Edge Trigger on SIGLENT oscilloscopes
January 22, 2018
How to use the Dropout Trigger with SIGLENT Oscilloscopes
January 22, 2018
Learn how to use the dropout trigger to isolate signals that are below a set trigger value and are missing information.
Capture and transfer waveforms
January 22, 2018
Learn how to easily capture and transfer waveform data from a SIGLENT SDG osiclloscope to an SDG function generator. Once the data has been transferred to the SDG, you can edit and adjust the waveform and perform extended testing.