Siglent Review SDS 1104X-E Review
May 24, 2018
This is a (almost) complete review of the SDS 1104X-E oscilloscope.
EEVblog #985 – Siglent SDS1202X-E Oscilloscope Teardown
February 27, 2018
Teardown of the Siglent SDS1202X-E 200MHz $379 oscilloscope! NOTE: This is the 100MHz 1102E which will never be released, but it’s the same hardware
How to use the Interval Trigger with a SIGLENT Oscilloscope
January 22, 2018
How to use the Edge Trigger on SIGLENT oscilloscopes
January 22, 2018
How to use the Dropout Trigger with SIGLENT Oscilloscopes
January 22, 2018
Learn how to use the dropout trigger to isolate signals that are below a set trigger value and are missing information.
Capture and transfer waveforms
January 22, 2018
Learn how to easily capture and transfer waveform data from a SIGLENT SDG osiclloscope to an SDG function generator. Once the data has been transferred to the SDG, you can edit and adjust the waveform and perform extended testing.
Find the 3 dB point of a filter using an oscilloscope and function generator
January 22, 2018
In this video, we show how to characterize a filter using a scope and function generator. We also compare the scope/gen data to the same filter tested using a spectrum analyzer and tracking generator.
Basics of the FFT function on SIGLENT Oscilloscopes
January 22, 2018
The Sequence Function for SDSX and X-E series Oscilloscopes
January 22, 2018
Learn how to capture and replay multiple trigger events using sequence mode.
How to install SIGLENT EasyScopeX software
January 22, 2018