Application Notes

SDG6000X Series

Multi generator synchronization

July 19, 2019

1. Introduction Multi-channel function generators are useful in many situations. For example, in Radar testing the generator needs to output several phase coherent signals and for the phase to be independently adjustable for each signal. In 3-phase power line harmonic distortion testing, a 4 channel generator is required to simulate the multiple voltages and currents. … Continued

Secure products without K-lock slots

May 27, 2019

Many products have Kensington, or K-lock slots to help provide a location to secure a cable lock or other device to help prevent theft. Some products do not have locations for cable lock connections. In this case, we recommend using a special glue or physical attachment system to secure the cable to the case of … Continued

DIY Spectrum Analyzer Input Protection

May 24, 2019

Spectrum analyzers like the SIGLENT SSA3000X and SVA1000X series are extremely useful instruments that can provide invaluable insight into broadcast signal performance, transmitter troubleshooting, and interference as well as RF device characterization and EMC testing. But, like other spectrum analyzers, they are very sensitive and can be damaged easily, if the proper precautions are not … Continued

Measuring Power Supply Control Loop Response with Bode Plot II

May 24, 2019

Introduction Stability is one of the most important characteristics in power supply design. Traditionally, stability measurements require expensive frequency response analyzers (FRA) which are not always available in a laboratory. Now, using a Siglent oscilloscope, like the SDS1204X-E with the newly released Bode Plot Ⅱ software, together with a Siglent arbitrary waveform generator (SDG or … Continued

Bode Plot of a filter using an oscilloscope and function generator

February 26, 2019

A Bode plot is a method of graphically displaying the frequency response of a system or device-under-test (DUT). Commonly, the magnitude and phase response of the device are plotted with respect to frequency using a shared horizontal frequency axis as shown in the example below:   By showing both the magnitude and phase information on … Continued

Programming Example: List connected VISA compatible resources using PyVISA

February 19, 2019

PyVISA is a software library that enables Python applications to communicate with resources (typically instruments) connected to a controlling computer using different buses, including: GPIB, RS-232, LAN, and USB. This example scans and lists the available resources. It requires PyVISA to be installed (see the PyVISA documentation for more information) *** #Example that scans a … Continued

Programming Example: Using Python to configure a basic waveform with an SDG X series generator via open sockets (LAN)

November 21, 2018

#!/usr/bin/env python 2.7.13 #-*- coding:utf-8 –*- #—————————————————————————– # The short script is a example that open a socket, sends basic commands # to set the waveform type, amplitude, and frequency and closes the socket. # #No warranties expressed or implied # #SIGLENT/JAC 11.2018 # #—————————————————————————– import socket # for sockets import sys # for exit … Continued

Verification of a working remote communications connection using NI – MAX

November 19, 2018

Automating a test can dramatically increase the productivity, throughput, and accuracy of a process. Automating a setup involves connecting a computer to the test instrumentation using a standard communications bus like USB or LAN and then utilizing code entered via a software layer (like LabVIEW, .NET, Python, etc..) to sequence the specific instrument commands and … Continued