Application Notes

SDS6000A Series

Jitter spectrum measurements with a digital oscilloscope

February 21, 2022

Clockworks Signal Processing released an application note that measures jitter using a SIGLENT XE series of oscilloscopes. The basic idea is simple enough – measure the clock edges and see if they are all exactly evenly spaced or if they change (jitter) over time. A non-uniform clock fed to an ADC or DAC will produce … Continued

Oscilloscope Feature and Options Table

January 14, 2022

SIGLENT has a number of oscilloscopes to help fit your application needs and budget. Here is a table of features and options of our most powerful oscilloscopes to help decide what is best for you. S – Standard, included O – Optional  (1) – Bode requires a SIGLENT SAG, SDG, or internal function generator to … Continued

Oscilloscope Remote control TEK emulation mode

July 27, 2021

Overview This application note describes the features and usage of the Tektronix compatibility mode for remote control of the SIGLENT SDS5000X and SDS6000A oscilloscope series. In many cases, a SIGLENT SDS5000X/6000A scope can replace a similar Tektronix product without many changes to the existing code. Furthermore, it describes in detail the limitations of the individual … Continued

Power Supply Design: Load Step Response with a SIGLENT DC Electronic Load

April 3, 2020

Building a power supply that can handle various loads without oscillating can be a challenge. Computational models and computer simulations can help get your design headed in the right direction, but physical testing is essential to proving the performance of your design. One method of quickly determining stability is to use a load step response. … Continued

Analyzing GSM Radio Protocol with a Siglent SDS2000X Plus Oscilloscope

March 10, 2020

Two SIGLENT users, Karel and Simon Sotek, email2@avanaconsulting.de recently took a SIGLENT SDS2354X Plus oscilloscope and investigated a GSM cell phone signal. Here is their report: We took a retired Siemens A36 cellphone to learn the capabilities of this new Siglent scope. Available documentation and medium-density PCB of the selected A36 made the signal probing … Continued

Measuring Power Supply Control Loop Response with Bode Plot II

May 24, 2019

Introduction Stability is one of the most important characteristics in power supply design. Traditionally, stability measurements require expensive frequency response analyzers (FRA) which are not always available in a laboratory. SIGLENT has released Bode Plot Ⅱ features to the SIGLENT SDS1104X-E, SDS1204X-E, SDS2000X-E, SDS2000X Plus, and SDS5000X series of oscilloscopes. When combined with a Siglent … Continued

Bode Plot of a filter using an oscilloscope and function generator

February 26, 2019

A Bode plot is a method of graphically displaying the frequency response of a system or device-under-test (DUT). Commonly, the magnitude and phase response of the device are plotted with respect to frequency using a shared horizontal frequency axis as shown in the example below:   By showing both the magnitude and phase information on … Continued